Tenant scaling aims to improve or reduce the service capabilities of the tenant, including the computing and storage capacities. To meet this purpose, you can improve the service capabilities of a single node or add service nodes. This topic describes how to upgrade or downgrade the unit config of a tenant to improve or reduce the service capabilities of a single node, thereby implementing the scaling of the tenant.
Prerequisites
Before you perform a scale-in or scale-out operation on a tenant, you must perform the following steps:
If the tenant is deleted, drop the resource pool of the tenant to release resources. Resources in an idle resource pool are also considered occupied resources.
For more information about how to drop a resource pool, see Drop a resource pool.
Perform a minor compaction to release the occupied memory resources.
For more information about how to manually initiate a minor compaction, see Manually initiate a minor compaction.
Considerations
If you want to upgrade the unit config, the total amount of resources after adjustment must meet the following requirements:
Sum(min_cpu) <= CPU_CAPACITY;
Sum(max_cpu) <= CPU_CAPACITY * resource_hard_limit;
Sum(memory_size) <= MEM_CAPACITY;
Sum(log_disk_size) <= LOG_DISK_CAPACITY;
where:
CPU_CAPACITYindicates the total CPU capacity.MEM_CAPACITYindicates the total memory capacity.LOG_DISK_CAPACITYindicates the total capacity of the log disk.The total capacity of the log disk is jointly controlled by the cluster-level parameters
log_disk_sizeandlog_disk_percentage. Thelog_disk_sizeparameter specifies the size of the log disk space for storing REDO logs, and its default value is0. Thelog_disk_percentageparameter specifies the percentage of the log disk space for storing REDO logs, and its default value is0. Rules for using the two parameters are as follows:If the value of
log_disk_sizeis0but the value oflog_disk_percentageis not0, the system allocates log disk space based on the value oflog_disk_percentage.If the value of
log_disk_sizeis not0, the system allocates log disk space based on the value oflog_disk_size, regardless of whether the value oflog_disk_percentageis0.If the values of both
log_disk_sizeandlog_disk_percentageare0, the system automatically calculates the percentage of the disk space occupied by REDO logs. The percentage depends on whether the disk is shared by REDO logs and data.If the disk is shared, the percentage of the disk space occupied by REDO logs is 30%.
If the disk is exclusive for REDO logs, the percentage of the disk space occupied by REDO logs is 90%.
For more information about the
log_disk_sizeparameter, see log_disk_size.For more information about the
log_disk_percentageparameter, see log_disk_percentage.resource_hard_limitindicates a specific system parameter.The system allocates CPU resources based on the value of the
resource_hard_limitparameter. The value range is[100, 10000]. The default value is100, indicating that overprovisioning is not allowed.For more information about the
resource_hard_limitparameter, see resource_hard_limit.
Modify the unit config
When you upgrade or downgrade the unit config of a tenant for scaling, two cases exist.
If the tenant uses an independent unit config, you can directly modify its unit config.
If multiple tenants use the same unit config, you must replace the original unit config of the target tenant with a new one.
Obtain the ID of the unit config
Verify whether the tenant uses an independent unit config. Run the following command to obtain the ID of the unit config used by the current tenant.
Log on to the
systenant as therootuser.obclient -h172.30.xxx.xxx -P2883 -uroot@sys#obdemo -pxxxx -AQuery the ID of the unit config used by the current tenant.
obclient> SELECT a.TENANT_NAME, b.UNIT_CONFIG_ID FROM oceanbase.DBA_OB_TENANTS a,oceanbase.DBA_OB_RESOURCE_POOLS b WHERE b.TENANT_ID=a.TENANT_ID; +----------------+----------------+ | TENANT_NAME | UNIT_CONFIG_ID | +----------------+----------------+ | sys | 1 | | midas0_3790 | 1008 | | midas0_3790 | 1008 | | midas0_3790 | 1007 | | mq_t1 | 1006 | | oracle_tenant1 | 1003 | +----------------+----------------+ 6 rows in set
In the query result, if the UNIT_CONFIG_ID value of the current tenant is the same as other tenants, multiple tenants use the same unit config.
If the UNIT_CONFIG_ID value of the current tenant is different from those of other tenants, the current tenant uses an independent unit config. For example, the UNIT_CONFIG_ID value of the mq_t1 tenant is different from those of other tenants. This indicates that the mq_t1 tenant uses an independent unit config.
Target tenant uses an independent unit config
If the target tenant uses an independent unit config, you can directly modify its unit_config parameter for scaling.
Here is an example:
To scale out the CPU resources of the mq_t1 tenant, perform the following steps:
Log on to the
systenant of the cluster as therootuser.obclient -h172.30.xxx.xxx -P2883 -uroot@sys#obdemo -pxxxx -AAccess the database named
oceanbase.obclient>USE oceanbase;Query the
UNIT_CONFIG_IDvalue of the target tenant.obclient> SELECT a.TENANT_NAME, b.UNIT_CONFIG_ID FROM oceanbase.DBA_OB_TENANTS a,oceanbase.DBA_OB_RESOURCE_POOLS b WHERE b.TENANT_ID=a.TENANT_ID; +----------------+----------------+ | TENANT_NAME | UNIT_CONFIG_ID | +----------------+----------------+ | sys | 1 | | midas0_3790 | 1008 | | midas0_3790 | 1008 | | midas0_3790 | 1007 | | mq_t1 | 1006 | | oracle_tenant1 | 1003 | +----------------+----------------+ 6 rows in setQuery the details about the unit config used by the tenant.
obclient> SELECT * FROM oceanbase.DBA_OB_UNIT_CONFIGS WHERE UNIT_CONFIG_ID='1006'; +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ | UNIT_CONFIG_ID | NAME | CREATE_TIME | MODIFY_TIME | MAX_CPU | MIN_CPU | MEMORY_SIZE | LOG_DISK_SIZE | MAX_IOPS | MIN_IOPS | IOPS_WEIGHT | +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ | 1006 | S2_unit_config | 2022-11-03 17:13:29.021410 | 2022-11-03 17:13:29.021410 | 3 | 3 | 12884901888 | 38654705664 | 30000 | 30000 | 3 | +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ 1 row in setModify the unit config.
Upgrade the configurations of the unit config named
S2_unit_config.obclient> ALTER RESOURCE UNIT S2_unit_config MAX_CPU 5, MIN_CPU 5;Query the current unit config of the tenant to verify whether the unit config is successfully modified.
obclient> SELECT * FROM oceanbase.DBA_OB_UNIT_CONFIGS WHERE UNIT_CONFIG_ID='1006'; +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ | UNIT_CONFIG_ID | NAME | CREATE_TIME | MODIFY_TIME | MAX_CPU | MIN_CPU | MEMORY_SIZE | LOG_DISK_SIZE | MAX_IOPS | MIN_IOPS | IOPS_WEIGHT | +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ | 1006 | S2_unit_config | 2022-11-03 17:13:29.021410 | 2023-01-12 10:28:57.606507 | 5 | 5 | 12884901888 | 38654705664 | 30000 | 30000 | 3 | +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ 1 row in set
In the query result, if the MAX_CPU and MIN_CPU fields are modified to new values, the unit config is modified.
Multiple tenants use the same unit config
If multiple tenants use the same unit config, you cannot simply upgrade or downgrade the unit config for scaling. This is because the modification will apply to all tenants that use this unit config.
In this case, you must create an independent unit config and then replace the original unit config of the target tenant with the new one.
To adjust the CPU resources for the mq_t1 tenant, perform the following steps:
Log on to the
systenant of the cluster as therootuser.obclient -h172.30.xxx.xxx -P2883 -uroot@sys#obdemo -pxxxx -AExecute the following statement to go to the database named
oceanbase:obclient>use oceanbase;Query the
UNIT_CONFIG_IDandRESOURCE_POOL_NAMEvalues of the target tenant.obclient> SELECT a.TENANT_NAME, b.NAME RESOURCE_POOL_NAME, b.UNIT_CONFIG_ID FROM oceanbase.DBA_OB_TENANTS a,oceanbase.DBA_OB_RESOURCE_POOLS b WHERE b.TENANT_ID=a.TENANT_ID; +----------------+---------------------+----------------+ | TENANT_NAME | RESOURCE_POOL_NAME | UNIT_CONFIG_ID | +----------------+---------------------+----------------+ | sys | sys_pool | 1 | | midas0_3790 | midas0_3790_pool_z3 | 1008 | | midas0_3790 | midas0_3790_pool_z2 | 1008 | | midas0_3790 | midas0_3790_pool_z1 | 1007 | | mq_t1 | mq_pool_01 | 1006 | | oracle_tenant1 | oracle_pool_01 | 1003 | +----------------+---------------------+----------------+ 6 rows in setQuery the details about the unit config used by the tenant.
obclient> SELECT * FROM oceanbase.DBA_OB_UNIT_CONFIGS WHERE UNIT_CONFIG_ID='1006'; +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ | UNIT_CONFIG_ID | NAME | CREATE_TIME | MODIFY_TIME | MAX_CPU | MIN_CPU | MEMORY_SIZE | LOG_DISK_SIZE | MAX_IOPS | MIN_IOPS | IOPS_WEIGHT | +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ | 1006 | S2_unit_config | 2022-11-03 17:13:29.021410 | 2023-01-12 10:28:57.606507 | 5 | 5 | 12884901888 | 38654705664 | 30000 | 30000 | 3 | +----------------+----------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ 1 row in setCreate an independent unit config and set the sizes of the resource items to desired values.
Create a unit config named
new_S2_unit_configwhich has higher configurations than the current unit config.obclient> CREATE RESOURCE UNIT new_S2_unit_config MAX_CPU = 5, MIN_CPU = 5, MEMORY_SIZE = '12884901888',LOG_DISK_SIZE = '38654705664',MAX_IOPS = 30000, MIN_IOPS = 30000, IOPS_WEIGHT=3;Replace the original unit config of the target tenant with the new one.
obclient> ALTER RESOURCE POOL mq_pool_01 unit='new_S2_unit_config';Query the current unit config of the tenant to verify whether the unit config is successfully modified.
obclient> SELECT * FROM oceanbase.DBA_OB_UNIT_CONFIGS WHERE UNIT_CONFIG_ID='1006'; +----------------+--------------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ | UNIT_CONFIG_ID | NAME | CREATE_TIME | MODIFY_TIME | MAX_CPU | MIN_CPU | MEMORY_SIZE | LOG_DISK_SIZE | MAX_IOPS | MIN_IOPS | IOPS_WEIGHT | +----------------+--------------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ | 1006 | new_S2_unit_config | 2022-12-03 17:13:29.021410 | 2022-12-03 17:13:29.021410 | 5 | 5 | 12884901888 | 38654705664 | 30000 | 30000 | 3 | +----------------+--------------------+----------------------------+----------------------------+---------+---------+-------------+---------------+----------+----------+-------------+ 1 row in set
More information
Query the
GV$OB_SERVERSview for the upper limit of each resource item.For more information about the
GV$OB_SERVERSview, see GV$OB_SERVERS.Here is an example:
obclient> SELECT * FROM oceanbase.GV$OB_SERVERS; +-------------+----------+--------------+----------+--------------+------------------+--------------+------------------+--------------+--------------+-------------------+-------------------+-----------------+--------------------+------------------+-------------------------+--------------+-------------------------+-----------------------+ | SVR_IP | SVR_PORT | ZONE | SQL_PORT | CPU_CAPACITY | CPU_CAPACITY_MAX | CPU_ASSIGNED | CPU_ASSIGNED_MAX | MEM_CAPACITY | MEM_ASSIGNED | LOG_DISK_CAPACITY | LOG_DISK_ASSIGNED | LOG_DISK_IN_USE | DATA_DISK_CAPACITY | DATA_DISK_IN_USE | DATA_DISK_HEALTH_STATUS | MEMORY_LIMIT | DATA_DISK_ABNORMAL_TIME | SSL_CERT_EXPIRED_TIME | +-------------+----------+--------------+----------+--------------+------------------+--------------+------------------+--------------+--------------+-------------------+-------------------+-----------------+--------------------+------------------+-------------------------+--------------+-------------------------+-----------------------+ | xx.xx.xx.47 | 2882 | sa128_obv4_1 | 2881 | 51 | 51 | 6.5 | 6.5 | 161061273600 | 19327352832 | 96569655296 | 57982058496 | 8858370048 | 1030284640256 | 8258584576 | NORMAL | 214748364800 | NULL | NULL | | xx.xx.xx.158 | 2882 | sa128_obv4_3 | 2881 | 51 | 51 | 19 | 22 | 182536110080 | 81604378624 | 386345730048 | 176093659136 | 65431142400 | 4249937248256 | 49568284672 | NORMAL | 214748364800 | NULL | NULL | | xx.xx.xx.43 | 2882 | sa128_obv4_1 | 2881 | 51 | 51 | 19 | 22 | 161061273600 | 81604378624 | 386345730048 | 176093659136 | 76705431552 | 4249937248256 | 49572478976 | NORMAL | 214748364800 | NULL | NULL | | xx.xx.xx.106 | 2882 | sa128_obv4_2 | 2881 | 51 | 51 | 19 | 22 | 161061273600 | 81604378624 | 386345730048 | 176093659136 | 65431142400 | 4249937248256 | 49729765376 | NORMAL | 214748364800 | NULL | NULL | | xx.xx.xx.81 | 2882 | sa128_obv4_2 | 2881 | 51 | 51 | 6.5 | 6.5 | 161061273600 | 19327352832 | 96569655296 | 57982058496 | 8858370048 | 1030284640256 | 8269070336 | NORMAL | 214748364800 | NULL | NULL | | xx.xx.xx.19 | 2882 | sa128_obv4_3 | 2881 | 51 | 51 | 5 | 5 | 182536110080 | 12884901888 | 96569655296 | 38654705664 | 5838471168 | 1030284640256 | 5649727488 | NORMAL | 214748364800 | NULL | NULL | +-------------+----------+--------------+----------+--------------+------------------+--------------+------------------+--------------+--------------+-------------------+-------------------+-----------------+--------------------+------------------+-------------------------+--------------+-------------------------+-----------------------+ 6 rows in setQuery the
GV$OB_UNITSview for the resource allocation of all tenants in the cluster.For more information about the
GV$OB_UNITSview, see GV$OB_UNITS.Here is an example:
obclient> select SVR_IP,SVR_PORT,UNIT_ID,TENANT_ID,MAX_CPU,MIN_CPU,ceil(MEMORY_SIZE/1024/1024/1024) MEMORY_SIZE_G,MAX_IOPS,MIN_IOPS,IOPS_WEIGHT,ceil(LOG_DISK_SIZE/1024/1024/1024) LOG_DISK_SIZE_G,ceil(LOG_DISK_IN_USE/1024/1024/1024) LOG_DISK_IN_USE_G,ceil(DATA_DISK_IN_USE/1024/1024/1024) DATA_DISK_IN_USE_G,STATUS,CREATE_TIME from oceanbase.GV$OB_UNITS; +--------------+----------+---------+-----------+---------+---------+---------------+----------+----------+-------------+-----------------+-------------------+--------------------+--------+----------------------------+ | SVR_IP | SVR_PORT | UNIT_ID | TENANT_ID | MAX_CPU | MIN_CPU | MEMORY_SIZE_G | MAX_IOPS | MIN_IOPS | IOPS_WEIGHT | LOG_DISK_SIZE_G | LOG_DISK_IN_USE_G | DATA_DISK_IN_USE_G | STATUS | CREATE_TIME | +--------------+----------+---------+-----------+---------+---------+---------------+----------+----------+-------------+-----------------+-------------------+--------------------+--------+----------------------------+ | xx.xx.xx.43 | 2882 | 1 | 1 | 5 | 2 | 32 | 10000 | 10000 | 1 | 32 | 26 | 11 | NORMAL | 2022-11-03 15:36:31.693272 | | xx.xx.xx.43 | 2882 | 1001 | 1001 | NULL | NULL | 4 | NULL | NULL | NULL | 10 | 8 | 16 | NORMAL | 2022-11-03 17:33:15.340453 | | xx.xx.xx.43 | 2882 | 1001 | 1002 | 12 | 12 | 29 | 60000 | 60000 | 6 | 87 | 37 | 21 | NORMAL | 2022-11-03 17:33:15.340453 | | xx.xx.xx.43 | 2882 | 1007 | 1007 | NULL | NULL | 2 | NULL | NULL | NULL | 4 | 0 | 0 | NORMAL | 2023-01-04 23:50:57.990761 | | xx.xx.xx.43 | 2882 | 1007 | 1008 | 5 | 5 | 11 | 30000 | 30000 | 3 | 33 | 2 | 1 | NORMAL | 2023-01-04 23:50:57.990761 | | xx.xx.xx.158 | 2882 | 3 | 1 | 5 | 2 | 32 | 10000 | 10000 | 1 | 32 | 26 | 11 | NORMAL | 2022-11-03 15:36:31.690365 | | xx.xx.xx.158 | 2882 | 1003 | 1001 | NULL | NULL | 4 | NULL | NULL | NULL | 10 | 8 | 16 | NORMAL | 2022-11-03 17:33:15.344035 | | xx.xx.xx.158 | 2882 | 1003 | 1002 | 12 | 12 | 29 | 15000 | 15000 | 1 | 87 | 26 | 21 | NORMAL | 2022-11-03 17:33:15.344035 | | xx.xx.xx.158 | 2882 | 1009 | 1007 | NULL | NULL | 2 | NULL | NULL | NULL | 4 | 0 | 0 | NORMAL | 2023-01-04 23:50:57.998665 | | xx.xx.xx.158 | 2882 | 1009 | 1008 | 5 | 5 | 11 | 30000 | 30000 | 3 | 33 | 2 | 1 | NORMAL | 2023-01-04 23:50:57.998665 | | xx.xx.xx.47 | 2882 | 1004 | 1007 | NULL | NULL | 2 | NULL | NULL | NULL | 4 | 3 | 6 | NORMAL | 2023-01-04 18:32:08.216823 | | xx.xx.xx.47 | 2882 | 1004 | 1008 | 5 | 5 | 11 | 30000 | 30000 | 3 | 33 | 3 | 1 | NORMAL | 2023-01-04 18:32:08.216823 | | xx.xx.xx.47 | 2882 | 1010 | 1009 | NULL | NULL | 1 | NULL | NULL | NULL | 2 | 2 | 3 | NORMAL | 2023-01-06 16:52:53.867318 | | xx.xx.xx.47 | 2882 | 1010 | 1010 | 1.5 | 1.5 | 5 | 15000 | 15000 | 1 | 17 | 2 | 1 | NORMAL | 2023-01-06 16:52:53.867318 | | xx.xx.xx.19 | 2882 | 1006 | 1007 | NULL | NULL | 2 | NULL | NULL | NULL | 4 | 3 | 5 | NORMAL | 2023-01-04 18:32:08.217376 | | xx.xx.xx.19 | 2882 | 1006 | 1008 | 5 | 5 | 11 | 30000 | 30000 | 3 | 33 | 3 | 1 | NORMAL | 2023-01-04 18:32:08.217376 | | xx.xx.xx.81 | 2882 | 1005 | 1007 | NULL | NULL | 2 | NULL | NULL | NULL | 4 | 3 | 6 | NORMAL | 2023-01-04 18:32:08.217390 | | xx.xx.xx.81 | 2882 | 1005 | 1008 | 5 | 5 | 11 | 30000 | 30000 | 3 | 33 | 3 | 1 | NORMAL | 2023-01-04 18:32:08.217390 | | xx.xx.xx.81 | 2882 | 1011 | 1009 | NULL | NULL | 1 | NULL | NULL | NULL | 2 | 2 | 3 | NORMAL | 2023-01-06 16:52:53.867944 | | xx.xx.xx.81 | 2882 | 1011 | 1010 | 1.5 | 1.5 | 5 | 15000 | 15000 | 1 | 17 | 2 | 1 | NORMAL | 2023-01-06 16:52:53.867944 | | xx.xx.xx.106 | 2882 | 2 | 1 | 5 | 2 | 32 | 10000 | 10000 | 1 | 32 | 26 | 11 | NORMAL | 2022-11-03 15:36:31.689252 | | xx.xx.xx.106 | 2882 | 1002 | 1001 | NULL | NULL | 4 | NULL | NULL | NULL | 10 | 8 | 16 | NORMAL | 2022-11-03 17:33:15.344232 | | xx.xx.xx.106 | 2882 | 1002 | 1002 | 12 | 12 | 29 | 15000 | 15000 | 1 | 87 | 26 | 21 | NORMAL | 2022-11-03 17:33:15.344232 | | xx.xx.xx.106 | 2882 | 1008 | 1007 | NULL | NULL | 2 | NULL | NULL | NULL | 4 | 0 | 0 | NORMAL | 2023-01-04 23:50:57.995715 | | xx.xx.xx.106 | 2882 | 1008 | 1008 | 5 | 5 | 11 | 30000 | 30000 | 3 | 33 | 2 | 1 | NORMAL | 2023-01-04 23:50:57.995715 | +--------------+----------+---------+-----------+---------+---------+---------------+----------+----------+-------------+-----------------+-------------------+--------------------+--------+----------------------------+ 25 rows in set