Deploy a single-replica OceanBase cluster from the CLI

OceanBase Database can be deployed with a single replica. A single-replica OceanBase cluster can also be scaled out (by adding nodes) and therefore it is also referred to as a standalone cluster.

This topic will guide you through the process of deploying a single-replica OceanBase cluster from the CLI.

Prerequisites

Before installing OceanBase Database, make sure that the following conditions are met:

• The OBServer node has been properly configured. For more information, see Server configuration and Initialize the OBServer node using oat-cli.

• You have obtained the RPM package of OceanBase Database. For more information, see Prepare the installation packages.

Procedure

Step 1: Install the RPM package

1. Install the OceanBase Database RPM package.

   Here, $rpm_dir indicates the directory where the RPM package is stored, and $rpm_name indicates the name of the RPM package.

   [root@xxx /]# cd $rpm_dir
   [root@xxx $rpm_dir]# rpm -ivh $rpm_name
   

   Note

   OceanBase Database will be installed in the /home/admin/oceanbase directory.

   Here is an example:

   [root@xxx /home/admin/rpm]# rpm -ivh oceanbase-4.2.0.0-100000052023073123.el7.x86_64.rpm
   Preparing...                          ################################# [100%]
   Updating / installing...
      1:oceanbase-4.2.0.0-100000052023073################################# [100%]
   

2. Install OceanBase Client.

   An OceanBase instance is compatible with either Oracle or MySQL. If an Oracle tenant is created, a Java application needs to connect to the tenant by using the Java driver file (oceanbase-client-*.jar) provided by OceanBase. If you want to access an Oracle tenant from the command line, you also need to install OBClient.

   OBClient is an OceanBase CLI tool that can access both MySQL and Oracle tenants in OceanBase Database.

   Here is an example:

   [root@xxx $rpm_dir]# rpm -ivh obclient-1.2.6-20210510164331.el7.alios7.x86_64.rpm
   
   ## Check whether OBClient is installed.##
   [root@xxx $rpm_dir]# which obclient
   /usr/bin/obclient
   

Step 2: Configure directories

1. Clear the OceanBase directory (if it has been deployed).

   If you want to clear the previous OceanBase environment or the environment is messy or there are files that will affect the next installation due to an error that occurred during OceanBase installation and deployment, you can choose to clear the old OceanBase directory. Here, $cluster_name indicates the name of the cluster.

   [root@xxx admin]# su - admin
   -bash-4.2$ kill -9 `pidof observer` 
   -bash-4.2$ rm -rf /data/1/$cluster_name 
   -bash-4.2$ rm -rf /data/log1/$cluster_name 
   -bash-4.2$ rm -rf /home/admin/oceanbase/store/$cluster_name /home/admin/oceanbase/log/* /home/admin/oceanbase/etc/*config*
   -bash-4.2$ ps -ef|grep observer
   

   Here is an example:

   [root@xxx admin]# su - admin
   -bash-4.2$ kill -9 `pidof observer` 
   -bash-4.2$ rm -rf /data/1/obdemo 
   -bash-4.2$ rm -rf /data/log1/obdemo 
   -bash-4.2$ rm -rf /home/admin/oceanbase/store/obdemo /home/admin/oceanbase/log/* /home/admin/oceanbase/etc/*config*
   -bash-4.2$ ps -ef|grep observer
   

2. Initialize the OceanBase directory.

   We recommend that you install the data directory of OceanBase on a separate disk and then link it to the software home directory through a soft link. Here, $cluster_name indicates the name of the cluster.

   [root@xxx admin]# su - admin
   -bash-4.2$ mkdir -p /data/1/$cluster_name/{etc3,sstable,slog} 
   -bash-4.2$ mkdir -p /data/log1/$cluster_name/{clog,etc2} 
   -bash-4.2$ mkdir -p /home/admin/oceanbase/store/$cluster_name
   -bash-4.2$ for t in {etc3,sstable,slog};do ln -s /data/1/$cluster_name/$t /home/admin/oceanbase/store/$cluster_name/$t; done
   -bash-4.2$ for t in {clog,etc2};do ln -s /data/log1/$cluster_name/$t /home/admin/oceanbase/store/$cluster_name/$t; done
   

   Here is an example:

   [root@xxx admin]# su - admin
   -bash-4.2$ mkdir -p /data/1/obdemo/{etc3,sstable,slog} 
   -bash-4.2$ mkdir -p /data/log1/obdemo/{clog,etc2} 
   -bash-4.2$ mkdir -p /home/admin/oceanbase/store/obdemo
   -bash-4.2$ for t in {etc3,sstable,slog};do ln -s /data/1/obdemo/$t /home/admin/oceanbase/store/obdemo/$t; done
   -bash-4.2$ for t in {clog,etc2};do ln -s /data/log1/obdemo/$t /home/admin/oceanbase/store/obdemo/$t; done
   

   Note

   The obdemo directory is created based on the cluster name and can be customized. It is used by the startup process.

   The check result is as follows:

   -bash-4.2$ cd /home/admin/oceanbase
   -bash-4.2$ tree store/
   store/
   `-- obdemo
    |-- clog -> /data/log1/obdemo/clog
    |-- etc2 -> /data/log1/obdemo/etc2
    |-- etc3 -> /data/1/obdemo/etc3
    |-- slog -> /data/1/obdemo/slog
    `-- sstable -> /data/1/obdemo/sstable
   
   6 directories, 0 files
   

Step 3: Initialize the OceanBase cluster

1. Start the observer process.

   You must start the observer process as the admin user. The sample command is as follows:

   cd /home/admin/oceanbase && /home/admin/oceanbase/bin/observer {-I $ip | -i $devname} -P $rpc_port -p $sql_port -z $zone_name -d /home/admin/oceanbase/store/$cluster_name -r '$ip:2882:2881' -c $cluster_id -n $cluster_name -o "system_memory=30G,datafile_size=500G,config_additional_dir=/data/1/$cluster_name/etc3;/data/log1/$cluster_name/etc2"
   

   The parameters are described as follows:

   Parameter	Description
   -I | -i	-I: the IP address of the node to start. In a multi-server deployment, 127.0.0.1 cannot be used as the target IP address. We recommend that you use the specified IP address (-I 10.10.10.1) to start the node. -i: the name of the network interface card. You can use the ifconfig command to view the network interface card names. Note You can start the node by specifying both the IP address and the network interface card name (for example, -I 10.10.10.1 -i eth0), but we recommend that you do not specify both parameters.
   -p	the service port number, which is generally set to 2881.
   -P	the RPC port number, which is generally set to 2882.
   -n	the cluster name. Make sure that different clusters have different names.
   -z	the zone to which the observer process belongs.
   -d	the directory where the cluster is located. The directory is created when the cluster is initialized. Apart from the cluster name $cluster_name, other parameters should not be changed.
   -c	the cluster ID. It is a group of numbers. Make sure that different clusters have different IDs.
   -l	the log level.
   -r	the RS list. The information of the Root Service is indicated in the format of $ip:2882:2881, with the elements separated by semicolons.
   -o	the list of cluster startup parameters (configurations). It is an optional parameter. You can specify values for multiple parameters, separating the values with commas. Choose appropriate startup parameters and specify proper values for each parameter based on your business needs to optimize the cluster performance and resource utilization. Some commonly used cluster startup configurations are described as follows: cpu_count: the total number of CPU cores. system_memory: the memory size reserved for tenant ID 500. In other words, it is the internal memory reserved for OceanBase Database. If the system memory is limited, you can decrease the value of this parameter. Note that during performance tests, the system may run out of memory. memory_limit: the total size of available memory. datafile_size: the size of disk space available for data files. In other words, it is the size of the sstable file in OceanBase Database. It is set based on the available space in /data/1/. We recommend that you set it to at least 100G. datafile_disk_percentage: the percentage of total disk space occupied by data files. datafile_next: the automatic expansion step length of data files on disk. datafile_maxsize: the maximum space for automatic expansion of data files on disk. config_additional_dir: multiple directories for storing local configuration files for redundancy. log_disk_size: the size of the redo log disk. log_disk_percentage: the percentage of total disk space occupied by the redo log. syslog_level: the system log level. syslog_io_bandwidth_limit: the maximum disk I/O bandwidth allowed for system logs. System logs exceeding the bandwidth limit will be discarded. max_syslog_file_count: the maximum number of log files that can be stored before old log files are recycled. enable_syslog_recycle: the switch to enable log file recycling. It is used in conjunction with the max_syslog_file_count parameter to determine whether to recycle old log files. The datafile_size, datafile_disk_percentage, datafile_next, and datafile_maxsize parameters are used to implement automatic expansion of data files on disk. For more information, see Configure automatic expansion of disk data files. For more information about cluster configurations, see Overview of system configurations.

   Here is an example:

   [root@xxx admin]# su - admin
   -bash-4.2$ cd /home/admin/oceanbase && /home/admin/oceanbase/bin/observer -I 10.10.10.1 -P 2882 -p 2881 -z zone1 -d /home/admin/oceanbase/store/obdemo -r '10.10.10.1:2882:2881' -c 10001 -n obdemo -o "system_memory=30G,datafile_size=500G,config_additional_dir=/data/1/obdemo/etc3;/data/log1/obdemo/etc2"
   

   Run the following command to check whether the observer process has started successfully:

   • Use the netstat -ntlp command. If the process listens on ports 2881 and 2882, the process has started successfully.
   • Use the ps -ef|grep observer command to return the observer process information.

   Here is an example:

   -bash-4.2$ netstat -ntlp
   (Not all processes could be identified, non-owned process info
   will not be shown, you would have to be root to see it all.)
   Active Internet connections (only servers)
   Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
   tcp        0      0 0.0.0.0:2881            0.0.0.0:*               LISTEN      11113/observer
   tcp        0      0 0.0.0.0:2882            0.0.0.0:*               LISTEN      11113/observer
   ...        ...    ...                       ...                     ...         ...
   
   -bash-4.2$ ps -ef|grep observer
   admin    11113      0 43 17:58 ?        00:00:14 /home/admin/oceanbase/bin/observer -I 10.10.10.1 -P 2882 -p 2881 -z zone1 -d /home/admin/oceanbase/store/obdemo -r 10.10.10.1:2882:2881 -c 10001 -n obdemo -o system_memory=30G,datafile_size=500G,config_additional_dir=/data/1/obdemo/etc3;/data/log1/obdemo/etc2
   

2. Perform the bootstrap operation for the cluster.

   Use OBClient to connect to the started observer process. The password is empty.

   [root@xxx admin]# obclient -h127.0.0.1 -uroot -P2881 -p******
   
   obclient> SET SESSION ob_query_timeout=1000000000;
   Query OK, 0 rows affected
   
   obclient> ALTER SYSTEM BOOTSTRAP ZONE 'zone1' SERVER '10.10.10.1:2882';
   Query OK, 0 rows affected
   

   Note

   If an error occurs when you perform this operation, check whether the startup parameters of the observer process and the directory permissions are correct and whether there is sufficient space in the log directory (which is shared with the data directory, where the data directory occupies the space in the log directory). If the node has insufficient memory resources, the bootstrap operation will fail. In any of these cases, resolve the issues and then clear the OceanBase directory and start over (refer to Clear the OceanBase directory (first time only) for more information).

3. Verify whether the cluster has been initialized.

   After the bootstrap initialization is completed, execute the SHOW DATABASES; command to verify whether the initialization is successful. If the query result shows that the oceanbase database is listed, the cluster initialization is successful.

4. Change the password.

   The password of the root user in the sys tenant is empty by default. Change the password after the initialization is successful.

   ALTER USER root IDENTIFIED BY '******';
   

Next steps

After the cluster is created, you can create user tenants as needed.

For more information about how to create a user tenant, see Create a tenant.

References

• Connect to an OceanBase tenant by using OBClient
• Overview of system configuration items
• ALTER USER
• Introduction to user tenants
• CREATE TENANT